AC STAG 4
Manuals and User Guides for AC STAG 4. We found 2 manuals for free downloads Connection and Programming Manual
Below you will find brief information for LPG controller Stag 4, LPG controller Stag 300 plus. This manual guides you through connecting and programming these controllers for your vehicle. It covers various aspects of installation, including wiring diagrams, pressure regulator selection, and injector nozzle selection. The manual also provides detailed instructions on using the diagnostic software, including auto-calibration, oscilloscope, and error handling. In addition, it explains how to program the controllers for optimal performance and includes a user manual for understanding the LED switchboard and acoustic signals.
Key Features
Connection Diagrams
Pressure Regulator Selection
Injector Nozzle Selection
Diagnostic Software
Auto-Calibration
Oscilloscope
Error Handling
Controller Programming
LED Switchboard
Acoustic Signals
Pages: 28 AC STAG 4 Connection and Programming Manual
Brand: AC Category: Cars Size: 827 KB
Languages: English
Open manualOther manuals and documents
Frequently Answers and Questions
How do I connect the LPG controller to my PC?
Connect the controller to your PC using an RS or USB interface manufactured by AC SA. Before starting the diagnostic software, turn the ignition on to provide voltage to the controller. The controller will then establish a connection with the diagnostic software.
What is the difference between the Stag 4 and Stag 300 plus controllers?
The Stag 300 plus controller offers a 3D multiplier calibration map, which allows for more precise calibration depending on engine revolutions.
How do I calibrate the engine at idle run?
Start the auto-calibration after the engine is turned on and the lambda probe begins to work. The engine should work at idle run during calibration.
advertisement